Categories Accessory Base Tower
Base Tower
Base Plates have two bearing discs with a corresponding circle of holes for SPEAR or Tongs rods. The discs are welded to a central ltube. At the bottom end there is a suspension disc fitting to your planetary shank, at the upper end there is a flat spring adding pressure to the rods for better electrical contact and more smooth rotation.
Base plates are usually made for rods 250mm or 300mm long, but can be ordereed in any other length as well. When chosing the height keep in mind that short rods come with lower capacity (because both ends cannot carry products) but long (thin) rods have less stabiltiy.
Chose a Base Plate which fits to your planetary axle. The position and number of the holes should fit to the gears size of your rods. Holes in the bearing plates of the Base Plate should never remain empty during the coating process.
|
Base tower for Spear and TongS rods suitable for planets of min. Ø130mm.10 bearing holes Ø4.3mm on pitch circle 100 for rods / substrates of max. Ø28mm. Plate suitable up to approx. 500°C above 1mPa. Spring washer can be replaced. Please select the desired shape of the planetary shaft from the variants. (Other heights and mounting holes are possible upon request.) |
188.00 €
*
Delivery weight: 1.7 kg
On Stock: > 4 |
|
Base tower for Spear and TongS rods suitable for planets of min. Ø130mm.15 bearing holes Ø4.3mm on pitch circle 110 for rods / substrates of max. Ø20mm. Plate suitable up to approx. 500°C above 1mPa. Spring washer can be replaced. Please select the desired shape of the planetary shaft from the variants. (Other heights and mounting holes are possible upon request.) |
200.00 €
*
Delivery weight: 1.693 kg
On Stock: > 5 |
|
Base tower for Spear and TongS rods suitable for planets of min. Ø130mm.6 bearing holes Ø4.3mm on pitch circle 90 for rods / substrates of max. Ø40mm. Plate suitable up to approx. 500°C above 1mPa. Spring washer can be replaced. Please select the desired shape of the planetary shaft from the variants. (Other heights and mounting holes are possible upon request.) |
181.00 €
*
Delivery weight: 1.7 kg
Manufactured upon Order |
|
Base tower for Spear and TongS rods suitable for planets of min. Ø130mm.15 bearing holes Ø4.3mm on pitch circle 110 for rods / substrates of max. Ø20mm. Plate suitable up to approx. 500°C above 1mPa. Spring washer can be replaced. Please select the desired shape of the planetary shaft from the variants. (Other heights and mounting holes are possible upon request.) |
205.00 €
*
Delivery weight: 1.692 kg
Manufactured upon Order |
|
Base tower for Spear and TongS rods suitable for planets of min. Ø130mm.18 bearing holes Ø4.3mm on pitch circle 112 for rods / substrates of max. Ø 16 mm. Plate suitable up to approx. 500 °C above 1 mPa. Spring washer can be replaced. Please select the desired shape of the planetary shaft from the variants. (Other heights and mounting holes are possible upon request.) |
225.00 €
*
Delivery weight: 1.468 kg
On Stock: > 5 |
|
Base tower for Spear and TongS rods suitable for planets of min. Ø130mm.30 bearing holes Ø4.3mm on pitch circle 120 for rods / substrates of max. Ø10 mm. Plate suitable up to approx. 500°C above 1mPa. Spring washer can be replaced. Please select the desired shape of the planetary shaft from the variants. (Other heights and mounting holes are possible upon request.) |
245.00 €
*
Delivery weight: 1.7 kg
Manufactured upon Order |
|
Base tower for Spear and TongS rods suitable for planets of min. Ø130mm.8 bearing holes Ø4.3mm on pitch circle 98 for rods / substrates of max. Ø32mm. Plate suitable up to approx. 500°C above 1mPa. Spring washer can be replaced. Please select the desired shape of the planetary shaft from the variants. (Other heights and mounting holes are possible upon request.) |
185.00 €
*
Delivery weight: 1.477 kg
On Stock: > 5 |
|
Base tower for Spear and TongS rods suitable for planets of min. Ø120mm.12 bearing holes Ø4.3mm on pitch circle 105 for rods / substrates of max. Ø24mm. Plate suitable up to approx. 500°C above 1mPa. Spring washer can be replaced. Please select the desired shape of the planetary shaft from the variants. (Other heights and mounting holes are possible upon request.) |
159.90 €
*
Delivery weight: 1.5 kg
On Stock: > 5 |
|
Product no.: 415550331
Base tower for Spear and TongS rods suitable for planets of min. Ø120mm.8 bearing holes Ø4.3mm on pitch circle 88 for rods / substrates of max. Ø32mm. Plate suitable up to approx. 500°C above 1mPa. Spring washer can be replaced. Please select the desired shape of the planetary shaft from the variants. (Other heights and mounting holes are possible upon request.) |
Single Piece
159.90 €
*
Delivery weight: 1.5 kg
On Stock: > 5 |
|
Product no.: 415551038
Base tower for Spear and TongS rods suitable for planets of min. Ø115mm.8 bearing holes Ø4.3mm on pitch circle 88 for rods / substrates of max. Ø32mm. Plate suitable up to approx. 500°C above 1mPa. Spring washer can be replaced. Please select the desired shape of the planetary shaft from the variants. (Other heights and mounting holes are possible upon request.) |
Single Piece
155.00 €
*
Delivery weight: 1.5 kg
On Stock: > 5 |
|
Product no.: 415551043
Base tower for Spear and TongS rods suitable for planets of min. Ø115mm.6 bearing holes Ø4.3mm on pitch circle 88 for rods / substrates of max. Ø32mm. Plate suitable up to approx. 500°C above 1mPa. Spring washer can be replaced. Please select the desired shape of the planetary shaft from the variants. (Other heights and mounting holes are possible upon request.) |
Single Piece
155.00 €
*
Delivery weight: 1.5 kg
On Stock: > 5 |
|
Product no.: 415551038-V20
Base tower for Spear and TongS rods suitable for planets of min. Ø115mm.8 bearing holes Ø4.3mm on pitch circle 88 for rods / substrates of max. Ø32mm. Plate suitable up to approx. 500°C above 1mPa. Spring washer can be replaced. Please select the desired shape of the planetary shaft from the variants. (Other heights and mounting holes are possible upon request.) |
155.00 €
*
Delivery weight: 1.5 kg
Manufactured upon Order |
|
|
|
|
Product no.: 415553970
Base tower for Spear and TongS rods suitable for planets of min. Ø130mm.20 bearing holes Ø4.3mm on pitch circle 112 for rods / substrates of max. Ø15mm. Plate suitable up to approx. 500°C above 1mPa. Spring washer can be replaced. Please select the desired shape of the planetary shaft from the variants. (Other heights and mounting holes are possible upon request.) |
Single Piece
184.00 €
*
Delivery weight: 1.7 kg
On Stock: > 5 |
|
Product no.: 403941039
Base tower for Spear and TongS rods suitable for planets of min. Ø130mm.12 bearing holes Ø4.3mm on pitch circle 105 for rods / substrates of max. Ø24mm. Plate suitable up to approx. 500°C above 1mPa. Spring washer can be replaced. Please select the desired shape of the planetary shaft from the variants. (Other heights and mounting holes are possible upon request.) |
Single Piece
192.00 €
*
Delivery weight: 1.7 kg
On Stock: > 5 |